Electrical/ Instrumentation Engineer

Qualified candidate will have ability to take lead electrical engineering position on medium to large multi-discipline projects and lead I&C engineering on small to large projects, prepare engineering plans and specifications, calculate voltage drop and short circuits, and be NEC knowledgeable. Position requires a BS in Electrical Engineering and PE Registration. Minimum 8-10 years of design experience with minimum 6 years consulting experience required.

Mechanical Engineer

This position would be the engineering lead/design manager on various projects and would be responsible for project coordination as well as engineering services. Must have ability to work on multiple projects concurrently. HVAC and process piping experience important. Strong communication and computer skills required. CADD skills and ASHRAE membership preferred. BS degree in Mechanical Engineering and Wisconsin PE Registration required.

Process Engineers/ Specialists

Ideal candidate will have 10 plus years of forest products industry experience to fill project process leader positions. A mixture of operating, consulting engineering and construction experience is preferred.

Specific technical experience should include one or more of the following areas:

Wood Yard, Pulping, Bleaching, Recovery, Tissue Machines, Biomass

Job responsibility as project process leader will include:

• Heat and Material balances
• P & IDs
• General arrangements
• Equipment specifications
• Administrative control of scope, budget and schedule
  

Process Control Engineer

We require an individual with pellet mill or other heavy industrial background and experience for our current process industry project activity in the following areas:

• P & ID Design
• Loop Diagrams/Loop Narratives
• Instrument Selection/Spec Sheets
• Valve Sizing and Selection
• Price Inquiries and Comparison of Tenders
• DCS/ PLC Architecture/Layout
• DCS/ PLC Mapping, Configuration and Graphics
• PLC Logic and Programming
• Installation Support
• Commissioning and Start Up

In addition, experience in the following areas would be an asset:

• Biomass/ Pellet Mill Control
• Pulp Mill Control
• Boiler Control
• Paper Machine Control
• High Technology Analyzers
• Communications Networks
• System Integration
• Plant Wide Control

Senior Project Manager

In response to our current growth in the biomass industry we are now seeking a qualified project manager:

Job Description:

The position will appeal to fully mature professional, with a minimum of five years project management experience in cost-plus and/or turnkey environments, preferably in the power generation/ biomass sectors. Team players committed to meeting client needs as well as budgetary requirements, they should be capable of managing projects of $25 million and more, and be familiar with project management and design applications.

Required Skills/Qualifications:

• Must have good commercial sense
• Ability and experience in successfully negotiating with clients
• Excellent communication skills, both verbal and written
• Excellent knowledge in civil and industrial
• Experience in consulting firms
• Professional registration is essential

Piping Designer/ Process Industry Projects

Experience piping designer with strong CAD skills are required to support current and planned project activity for the pulp and paper and related industries. Individuals with 3D piping design experience and good communication skills will be given particular consideration.

Project Engineering/ Process Industry Projects

We require a mechanical engineer with 5 to 10 years' experience in project engineering and design for the process industries. Biomass or food and beverage experience would be an asset. Eligibility for PE registration is a plus, along with good verbal and written communication skills.

Civil/Structural Engineer

Major Responsibilities:

• Site-work demolition, cut & fill, drainage, roads, railroads, storage dikes, and finish grading
• Reinforced concrete design-equipment foundations, machine foundations, concrete structures, Containment systems, and plant buildings
• Structural steel design-process structures, rail & truck loading structures, pipe & cable tray racks, and equipment structures

Software Applied:

• STAAD. Pro and/or visual analysis (general analysis and finite element), descon (structural steel connection design), excel, MathCAD, frameworks (3D modeling), Microstation (2D drawing).
• Most ofthe civil engineers design work in the process/industrial markets-75% to 85% on a typical project, is structural in nature. The engineer is usually referred to as a Civil/Structural Engineer. The Civil/Structural Engineer works closely with the piping design, mechanical, vessel and electrical groups to design the necessary foundations, structures and pipe racks required to support process equipment, process piping, instrumentation and power cable trays, and electrical equipment. Forest products structures are typically open with grating or plat floors and no walls or roof. Chemical plant structures are usually enclosed. The Civil/Structural Engineer may also design the structural systems for plant warehouses, control rooms, electrical equipment shelters and other plant buildings.
• The Civil/Structural Engineer will employ static analysis for most equipment foundations and process structures. Dynamic analysis is used for vibrating machine foundations, blast resistant structures where required for seismic resisting structural systems.
• Civil design tasks may include plant drainage systems, sanitary sewers, paving, plant roads, railroads, site preparation, settling ponds, marine docks, and tank and spill containment systems.
• Civil/Structural Engineers have to design to national codes and standards such as IBC, ASEC-7, ACI, AISC, OSHA and ASTM. Understanding, interpreting and correctly applying these codes and standards are paramount to a safe design.
• The Civil Engineering graduate employed in the process industry will have the opportunity to quickly gain the experience necessary to pursue professional licensing.

Training and Experience:

• 0-2 years of experience required, BS or MS in an engineering discipline, EIT certificate desirable, Registered Engineer required.

Structural Designer

Primary Job Responsibilities:

• Function as a structural designer by working closely with a lead engineer or in a small team designing large and medium sized projects or on multiple small projects. Design/draft new or modifications to existing buildings and other structures for industriallmanufacturing facilities. Work primarily involves but is not limited to steel framing, concrete structures, foundations and retrofit ofany type of structural element. Person will be a member of a structural team in the production of deliverables for the above items and will prepare plan and detail drawings of structures using CAD programs. Perform other duties related to project deliverables as directed by supervisor.

Training and Experience:

• As a minimum, applicants must have an Associate's Degree in CAD design/drafting curriculum or similar architectural/engineering program or equivalent. Applicant must have a minimum of 3 years experience in CAD design/drafting of structures using AutoCAD. This includes using and manipulating reference files. Experience with 3-D software such as frameworks or Revit is a plus. Similar experience performing architectural design may be acceptable. Any experience using Microstation is a plUS. Person must have a general knowledge ofCivil and Structural design concepts and vocabulary. Must be able to follow and adhere to CAD standards, which can vary from project to project. Experience in industriallchemicallfoodlbiotechlmanufacturing and/or forest projects is preferred, but not required. Position requires ability to receive guidance and assignments from lead engineers or lead designers.

Other Essential Functions

• Requires interaction and coordination with other design disciplines to complete design tasks. Must occasionally travel to client sites for gathering information and measurements of existing facilities. Must be able to trouble-shoot computer software problems when they arise. The above description shall not be construed as a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day.

Other Requirements:

• Although the work is performed within an office environment, there are occasional site visits that require ladder, stair and scaffold climbing in manufacturing and/or process structures. Must be able to respond to both audible and visible plant alarms. Must be able to tolerate seasonal extremes in temperature or humidity on site visits. May occasionally require working near hazardous equipment and machinery and exposure to noise, dust, gas or fumes during site visits; must wear PPE, including fall protection hamess at times and these items, along with routine safety training will be provided.

Mechanical/Process Engineer

Primary Job Responsibilities:

• Senior engineer; independently applies advanced engineering techniques and analysis within the discipline.
• Develops designs that require innovation and ingenuity.
• Work performed with minimal supervision; has considerable latitude in determining objectives and approaches to assignments.
• Researches, develops, designs, and tests a variety ofequipment, facilities, components, products, and systems for commercial and industrial purposes.
• Evaluates the desired goal ofthe system and develops, designs, or selects the required equipment, power controls, piping, structures and earthwork to achieve the goal: Performs calculations and evaluations in the design of equipment and systems for industrial and commercial applications: Participates in plarming, cost development and management, and scheduling for assigned projects: Directs activities to ensure that construction, installation, and operational testing conform to functional specifications, recognized codes and standards, and customer: May direct and coordinate operation, maintenance, and repair ofequipment and systems in field installations: May use computer-assisted engineering and design software and equipment to perform engineering task.

Training and Experience:

• 7-10 years of related experience required
• BS or MS in an engineering discipline
• PE registration required

Electrical Engineer

Primary Job Responsibilities:

General responsibilities include analysis of system requirements, specification and procurement equipment, development ofconstruction documents, and providing assistance during construction, commissioning, and startup. More specific responsibilities consist of:

• Discipline lead role on project teams
• Analysis and design ofelectrical systems
• Generation of design basis documents
• Development of electrical system studies and reports (short circuit, load flow, Arc-Flash, motor starting)
• Generation of one-line diagrams
• Development of comprehensive electrical drawing packages from bid phase through construction
• Provide technical guidance to design staff
• Preparation of bid specifications and bid evaluations
• Performing calculations and maintance of calculation books
• Sizing, specification and selection ofelectrical equipment
• Performing relay coordination studies
• Development of cost estimates
• Participation in safety reviews and hazard analyses
• Coordination of engineering and design activities with other project disciplines
• Providing final check and approval ofall design deliverables associated with electrical
• Coordination systems ofvendor acceptance testing, collection of vendor data, and development of project data books
• Support of construction, commissioning, and start-up ofnew facilities (onshore and offshore)
• Providing instruction, mentoring, and training to less experienced members of the department

Training and Experience:

• BS or MS in Electrical Engineering
• 10+ years experience in the design, engineering, and implementation ofpower generation and distribution systems for industrial production and processing facilities
• Registration required
• Must possess thorough knowledge of electrical codes, industrial electric power, grounding, and lighting and communication systems

Other Minimum/Prefered Qualifications:

• Ability to apply sound and diversified knowledge of discipline principles and practices in broad areas of assignments and related fields
• Ability to use advanced techniques and the modification and extension of the theories, concepts, and practices his/her field
• Makes decisions independently on engineering problems and methods
• Proficient working knowledge ofAutoCAD
• Ability to work independently and in a team environment
• Possess excellent organizational, communication and interpersonal skills
• PE registration highly desired

Mechanical/Piping Engineer Supervisor

Position Summary:

• Ideal candidate will possess a high level of skill in complex piping stress analysis and supply expertise in piping material engineering. The piping engineering supervisor will provide technical advice, supporting several projects simultaneously, mentoring and guiding lead piping engineers and coaching piping engineers.

Core Responsibilities:

As the understudy to the Engineering manager, duties will include:

• Reacting to urgent project needs and recommending appropriate action to resolve issues of piping design
• Reviewing piping stress calculations, giving a professional opinion on design and design options, promoting quality and consistency and taking part in technical meetings
• Assisting in preparation of proposals and man-hour estimates
• Checking and/or developing detailed project specifications from client or TCG specifications
• Create, edit, and revise department work instructions, engineering guides and guidelines
• Conducting development reviews and technical training programs for piping engineers
• Conducting internal technical audits, flexible short-term piping engineering resource in a project role
• Acting as lead piping engineer for the early stages of a project

Qualifications:

• Bachelor of Science in Engineering or equivalent
• Professional Engineer registered in Alberta (APEGGA)
• High level competency and experience in Oil and Gas pipe stress analysis with a sound practical problem solving aptitude
• Minimum of 15 years relevant experience with significant supervisory and leadership role responsibilities
• Good communication both written and oral skills in the English language
• Expertise in Oil and Gas piping materials engineering including selection criteria of common pipe materials and valve trims, piping specification writing skills and experience with common piping specialty items is an asset
• Has considerable understanding and application of technical principles, theories and concepts in the field. General knowledge of other related disciplines
• Provides solutions to a wide range of complex problems under general direction
• Determines and develops approach to solutions
• Work is reviewed upon completion for adequacy in meeting objectives
• Designs components or portions of systems, and modifies existing designs to develop or improve them.
• Uses computer-aided design equipment and/or graphic tools: gathers information, makes studies, performs calculations, and prepares original rough layouts and sketches to present design proposal: coordinates design criteria with engineering, tooling, material, and planning group in accordance with contractual specifications.

Training and Experience:

• 8+ years experience required designing electrical systems on Oil and Gas offshore, topside, and/or FPSO type projects. Drafting/design and related coursework required BS reduces experience requirement by 1-2 years.

Other Essential Functions:

• Proficient in AutoPlant for Electrical modeling

Other Requirements:

• Predominantly office work which could involve reaching at, above, or below the shoulders; driving cars, trucks, or other vehicles; working near hazardous equipment, machinery, and material; walking on uneven ground; climbing up and down stairways; walking on exposed grating at heights; exposure to noise, dust, gases, fumes, and extremes in temperature and humidity.

To apply please go to the CLIENT LOGIN located above. Type in APP. Resumes submitted without a completed application will not be considered. Please email all items in confidence to dlhietpas@tcgroup.com